Quick Steps to Fix Canon Printer Error 5100 [Ultimate Guide]

One of the most common error that Canon printer user faces is Canon printer error 5100. This error is related to ink cartridge fault.

The most likely reason behind the happening of this error is the impairment in the paper feed path or any packaging material which was left inside the machine.

In this post, we will let you know the possible procedure to solve this  Canon Printer Error 5100.

Quick Steps to Fix Canon Printer Error 5100

Reset the Ink Cartridge

The incorrectly set ink cartridge can prevent your printer device from functioning and it may prompt Canon Error 5100 to occur. To resolve this issue, open the printer’s front panel and rearrange the cartridge.

Reset the Printer

Sometimes it becomes essential to reset the printer, after every few days for its smooth functioning. If you are facing Canon printer error 5100 on your printer, then you can resolve it by simply resetting your printer device.

In order to reset your printer, press the stop button, hold it for 5 seconds and then release it. Now the printer is reset and it should work fine now.

Debris in the Printer

By cleaning your printer, you can fix Canon error 5100 effortlessly. There are probabilities that any small or torn piece of paper or any packaging material may have left inside the printer.

Even small remains can trigger Canon error 5100 so you need to make sure nothing should be left inside the printer machine.

In such case follow the below mentioned steps:

  • Unplug your printer device.
  • Take out the papers from the printer
  • Tap twice to remove any hindrance found in the paper feed path.
  • Now, plug the chord again and switch your printer on.
  • You can also blow the insides out of the printer with compressed air to take out any debris or material inside.

Paper Jamming

Sometimes you may face this Canon error 5100 while printing and you cannot remove the paper from the output slot. That’s all because of the paper jam.

The paper remains inside the machine and you cannot remove paper from the printer machine. In such a case, open the printer’s back panel and check if the paper is jammed inside or not. Prefer to re-arrange the paper stack again in the tray to prevent future jamming.

Clean The Printing Strip

This is also known as encoder strip, the white plastic material placed inside the printer. This strip mostly sits on the top of the drive belt.

Any type of ink stains or dirt on this strip can cause Canon Error 5100, so you need to always check for this printing strip if it is clean or not. If you see any kind of dirt or ink sitting on it, then wipe it off using a soft tissue or cloth instantly.

Get Help from Experts

We hope that the above-mentioned methods will fix your Canon printer 5100 error on your PC.

But in case if issue still persists, you can get in touch with our experts. They will help you in providing the most reliable and trust worthy solutions.

Leave a Comment