How To Resolve Or Fix HP Printer Error 403 ?

by

HP Printer Error 403 is a frequent issue with all-in-one printers. It totally disables printing. 

HP Printer Error 403
HP Printer Error 403

How to Fix a Error Code 403 ?

  • Check the URL again. Because it’s simple to misspell a URL, just retyping it may resolve the 403 problem.
  • Delete your cache and cookies.
  • Allow some time…
  • Directly contact the business, service, or organisation.
  • Make contact with your internet service provider.

Steps for Troubleshooting Error 403 on HP Printer

The following troubleshooting methods may assist in resolving the problem:

Method 1: Reinstall the printer’s print driver.

  • Remove the USB cable from the printer if it is connected to the computer.
  • Disable the power socket by flipping the power switch.
  • On Windows, look in the control panel for the ‘Devices and Printers‘ option.
  • Select the ‘Devices and Printers‘ tab.
  • The printer software will be uninstalled if you select the Remove Device option.
  • Reboot the computer or device.
  • Go to the HP support software and drivers page. Look for the printer software that corresponds to the model of your printer on this official website.
  • Install the printer software by following the directions on the screen.
  • Reconnect the printer’s USB port to the computer.
  • If taking a test document print does not resolve the error, it is recommended that you continue with the other troubleshooting steps.

Method 2: Restart the computer and printer.

  • Unplug the printer’s power supply and disconnect the USB port from the computer.
  • Save any unfinished work on the computer and turn it off.
  • Allow at least 30 seconds before turning on the computer and printer.
  • Reconnect the printer’s power supply and the USB port to the computer.
  • Turn on the computer system.
  • Try printing a test document. If rebooting does not resolve the problem, then other troubleshooting methods must be used.

Method 3: Changing your IP address

  • Note the IP address by clicking on the option at the top of the printer’s screen.
  • Enter the IP address into a web browser’s address bar and hit the enter key.
  • The printer status window will appear. Select the ‘network’ option.
  • Choose the proxy settings.
  • The printer status page is displayed.
  • Check that all fields are empty. The option for proxy server authentication must be unchecked. Then, press the apply button. You will be notified of your success.
  • Select the IP address.
  • Check the box for automatic IP address.
  • Switch to manual DNS server configuration by changing the DNS address.
  • Enter the preferred DNS server manually. 8.8.8.8 and 8.8.4.4 are auxiliary DNS addresses.
  • When you click Apply, a success message will appear on the screen.
  • For at least 30 seconds, turn off the printer.
  • Reboot the printer and print a test page. If the error persists, additional troubleshooting is required.

Method 4: Turn off the firewall software.

  • If the HP PRINTER ERROR continues, the simple steps listed below may assist in resolving the problem.
  • Disable the firewall software for the time being.
  • Disable your computer’s firewall software for the time being. It’s possible that it’s interfering with your print job.
  • Right-click on the tiny system tray icon and choose Properties.
  • Select the ‘disable firewall’ option.
  • The setting has been applied successfully.
  • If the problem continues after printing a test document, additional remedies must be explored.

Leave a Comment