How to resolve the RICOH PRINTER SC542 ERROR?

How to fix the RICOH PRINTER SC542 ERROR? Ricoh Printers are renowned for their efficiency and contribution to the market’s highest print quality. Fix Ricoh Printer Error Sc542 indicates a problem with the fuse’s temperature and the printer, which gets very hot. This problem renders the printer inoperable for an extended time, even when the printer switch is switched on.

RICOH PRINTER SC542 ERROR
RICOH PRINTER SC542 ERROR

A Comprehensive Guide to Resolving Error Sc542

There are many possible reasons for the Ricoh printer error code SC542, including an issue with the fusing thermistor, which may have become defective or out of place. Additionally, this error may occur if the connection to the fusing unit is incorrect or if the thermal fuse or fusing light is left unplugged. Apart from this, there may be an issue with the printer’s power supply board.

You’ve come to the correct spot if you’re searching for a solution to How to Fix Ricoh Printer Error sc542. The following are the important actions to take to resume printing from your Ricoh Printer:

Method 1: Correcting the mistake using a straightforward method

  1. To begin, you must hit the yellow-coloured key that indicates explicit modes.
  2. Following that, you must hit the 107 key on your keyboard.
  3. Now you must push and hold the button labelled “clear stop.”
  4. Later, press the copy-SP key and, after a few moments, open the printer’s front door to verify that it is functional and ready to print.
  5. Now, on the left side, toggle the switch on and then off. After that, you may close the printer’s door.
  6. You may now restart your printer since the error code should have been addressed using this method.

Method 2: Using the Arrow Keys, correct the mistake

  1. Begin the technique by hitting the escape key and simultaneously holding it and the online key.
  2. Now turn on the printer and begin using the up/down arrow keys to locate and pick the SP2 option.
  3. Rep the second step, but this time find and pick the SP5 option by pressing the enter key.
  4. Following that, you must locate 810 using the up/down arrow keys and press enter.
  5. Once the choices are complete, confirm them and then switch off the printer.
  6. Finally, turn on the printer to verify that the problem has not been obliterated.

Using these two techniques will almost certainly assist you in resolving Ricoh Printer problem sc542. However, if the error code continues to appear, you must contact a technical professional who can help you determine the problem via excellent technical support. Additionally, check any power supply connections since these are critical in fixing this problem and allowing you to use your Ricoh Printer again.

Note:- If you want to fix Epson Error code 1433, then click here

Discloser:-

Suppose you believe that the RICOH PRINTER SC542 ERROR, you should contact the printer call directly. Report the issue and get expert assistance.

Leave a Comment