A system problem has halted the printing process, resulting in the HP Printer Error State Message windows 10 .
The first option for getting your printer out of the error status is to modify the port settings.Do you have any additional printing problems? With our comprehensive how-to instructions, you’ll be able to fix anything like an engineer.
If you need to repair any other peripherals than your printer, don’t worry since we have a full Fix peripherals hub for you to check out.
Restoro PC Repair Tool is recommended for resolving a variety of PC issues:
This programme will fix common computer problems, protect you against file loss, viruses, and hardware failure, and optimise your machine for peak performance. In three simple actions, you can resolve PC problems and eliminate viruses:
- Install Restoro PC Repair Tool, which includes Patented Technologies (patent available here).
- To identify Windows faults that may be causing PC difficulties, click Start Scan.
- Repair should be clicked. All to address problems impacting the security and efficiency of your machine.
When attempting to utilise their printers, some Windows 10 customers experienced a problem. A system problem has halted the printing process, resulting in the Printer is in Error State error message. What does an error status on a printer mean? This problem is often caused by system permission settings, faulty drivers, or system conflicts.
We created this troubleshooting guide to assist you in resolving this HP Printer Error State problem.
How can I get my printer to work again?
Step 1:- Modify the port settings
- To launch the Device Manager, use the Windows logo key + R on your keyboard > type devmgmt.msc and press Enter.
- Select Show hidden devices from the View option at the top of the screen.
- Select Proprieties from the Ports (COM & LPT) menu.
- In the Properties window, go to the Port Settings tab.
- Select Use any interrupt that has been assigned to the port.
- Select the Enable legacy checkbox. Detection of Plug and Play > OK
- Restart your computer to check whether the problem has been resolved.
Step 2:- Ensure that your printer is connected to the internet.
- Select Devices and Printers from the Control Panel.
- The default printer keeps returning to its previous state.
- Choose Printer
- If your printer is shown as Offline, right-click on it and choose Use Printer Online.
- If it was able to connect to the internet, the Ready message would appear instead of Offline.
Step 3:- Uninstall and reinstall the printer driver
- Navigate to the Control Panel > choose View By Large Icons
- Select Devices and Printers.
- Remove device by right-clicking on your printer.
- Restart your computer once you have confirmed the device removal.
- If your printer is not immediately detected and installed when the PC reboots, disconnect it and reconnect it.
Step 4:- Enable the Print Spooler service to run in the background.
- In Windows 7 and Windows 10, click the Windows logo key + R on your keyboard, enter services.msc in the Run box, and then press Enter to see the network taskbar.
- In the right pane, look for the Print Spooler service and make sure it is set to Start. Right-click on Print Spooler > choose Proprieties.
- Set the Startup type to Automatic from the drop-down box on the General tab > click Apply > OK.
- To check whether the problem has been resolved, close the Services window and restart your computer.
Step 5 :- Make a Windows update
- Open Settings by pressing the Start button.
- Update & Security should be selected.
- Choose Windows Update.
- Click Keep an eye out for more information.
- Allow it to finish the procedure and restart your computer if it detects any updates.
- Check to see whether upgrading Windows solved the problem after restarting your computer.
- We hope that our suggestions were helpful in resolving your printer problem.
If the HP PRINTER FUSER ERROR, you can have your printer repaired. We hope the above solution can help you fix your HP PRINTER FUSER ERROR
We help you to Fix your all Printer Error Visit now Printererrorfix.com to solve your error.