Lexmark International Inc., based in the United States, is a well-known printer manufacturer and marketer. Lexmark printers are used by people all over the globe for both home and business usage. Fix the problem regarding Lexmark Printer Error 1102 Resolve now , with the given steps bellow .
Lexmark International is a manufacturer of a variety of laser printers and imaging devices. This American corporation is headquartered in Lexington, Kentucky. Lexmark printers are built to last. They produce high-quality images and are very durable. They provide monochrome laser printers, colour laser printers, as well as monochrome and colour multifunction printers.
1102 Lexmark Printer Error
Even though Lexmark printers are a step above the competition in terms of quality, errors or malfunctions can occur sometimes. Customers of Lexmark printers may sometimes encounter error 1102. This is a fairly frequent mistake, and the primary cause is a breakdown in communication between the printhead and All In One (AIO).
The following is a step-by-step procedure for resolving Lexmark Error number 1102:-
1st step:
- Switch off the AIO and remove the power supply from the printer unit’s rear.
- Wait about 60 seconds before proceeding to the next step.
- Reconnect the power source and power on the AIO.
- Verify that the error notice is still present. If you answered yes, go to the next step.
Step 2:
- Switch off the AIO.
- Remove the power supply from the unit’s rear.
- Open the top lid of the AIO.
- Shift the cartridge carrier to the unit’s centre using the carrier belt. Proceed with extreme caution.
- Disconnect the AIO unit’s two ink cartridges. Ensure the top cover is secure.
- Switch to a new power source.
- Switch on the AIO.
- If the problem continues, go to the next step.
Step 3:
If, despite the above-mentioned procedures, the issue continues, it may be for one of two causes.
- The printer’s printhead may have failed, or one or both ink cartridges may not be functioning correctly. You will need to verify it.
- Restart the AIO and disconnect the power supply from the unit’s back.
- Remove the AIO’s top cover and relocate the cartridge carrier to the unit’s centre region.
- Gently insert the colour ink cartridge.
- Reinstall the top cover and power on the printer.
- If the problem continues, go to the next step.
4th step:
- To resolve the problem, you will need to clean the cartridge contacts in this step.
- Cartridges should be removed and the contacts cleaned.
- Soak a clean towel in water and carefully wipe the cartridge nozzles.
- Wipe the cartridge with another dry towel.
- Allow for full drying of the nozzles before reinserting them.
- Clean the printhead contacts with a cotton swab.
- Clean until the cotton swabs are completely free of residue.
- Proceed to Test for Defective Cartridges
- Create a test page.
Discloser :-
By following all of the instructions, it will be much simpler to fix this problem. However, you may also contact the Printererrorfix.com Printer Support staff. Fix now the error Lexmark printer error 900.00 in few steps .