This article for all those Canon users who are facing Canon error code e05. Generally, 50% of the canon users are facing this issue and getting upset.
For your information, we would like to inform you that the Canon error e05 is a very critical issue you are dealing with. There is nothing very severe causing this error.
If you want to know the reasons behind this issue, then just go through the below-mentioned bullet points. The points signify the problems causing Canon printer error code e05.
- Effluence of the ink.
- Jammed paper.
You just need to follow the guidelines mentioned in this article. As these are the best, effecting, and relieving solutions for you.
The steps will only accommodate you if you follow each and every step appropriately without skipping any of them.
If you will try to jump the steps, then it will result in your failure. So, you need to make sure that you carefully read the steps and understand them.
Best Steps to Fix with Canon Error Code e05
Here is the top-secret to get out of Canon error code e05 and you will definitely follow these steps accurately.
Turn Off the Canon Printer
The first and foremost must step to do is to kindly switch off your printer. After turning your printer off, you can look for more steps. This solution will definitely work as mostly this issue happens because of the overheating problem.
Disconnect The Network Connection
Before switching off the printer you need to disconnect the internet connection connected to your printer. To put the device in relaxing mode you have to remove it from everywhere.
So, to resolve this error in sequence you need to disconnect your device, or if any command is given then immediately cancel it.
Remove The Cables
You need to make sure that if any LAN wire or the power cable is connected to the printer then you need to unplug or disconnect it. You have to make the printer totally free.
Place The Printer in Cool Place
Due to the excess usage, printer gets too hot. After following the above-mentioned steps, you need to place your printer at a cool place. So that it may cool down.
Also, you need to make sure the area should not be enclosed. It should be a cozy environment for your printer that will help you to solve the Canon Error e05.
Properly Check the Ink Cartridge
Sometimes the printer gets too-much heated and it starts disturbing the ink of the printer. When the heat gets too much then the ink starts leaking and causes Canon Error e05.
So you need to look at the ink cartridge and make sure to replace the ink box if it is leaked.
Check The Internal Parts
It can be probable that the internal parts also get dirty due to ink leakage. You need to take a piece of cloth, dip it into the water and squeeze it properly and then clean the parts of the printer perfectly.
Check The Tray
If your printer is loaded with lots of sheets, then you need to remove half of them. Do not over load the tray with lots of sheets.
Look for The Paper
If any scrap or sheet of paper is jammed in your printer, then you need to grab it out properly. Note to garb out the jammed object wisely.
If you will pull the paper rudely then it can damage the internal parts of the printer.
Restart The Printer
Restarting the printer is the greatest process to overcome any problem. So, without wasting more time just restart your printer.
Before restarting make sure no command should be given to the printer and the internet should also be disconnected too.
Also, make sure to plug out the cable wire and then wait for at least 5 minutes and then again replug the wire. And switch on your printer.
And there you go. See, how easy it was to handle this problem.
At The End
We hope you will be able to resolve the Canon error code e05 by your own. Now you can easily take full access to the printer without any tension.
If issue still persists, then you can get in contact with our experts. They will help you in providing the most reliable and trustworthy solutions.